Wall Mounted Indoor/Outdoor Waste Receptacle

Site Location

Frost’s 312-S stainless steel wall mounted indoor or outdoor waste receptacle is a durable and practical product. This waste receptacle was designed to be mounted on any indoor or outdoor wall material. Typically, the disposals are used in schools/universities, restaurants, malls, office buildings, condominiums, fitness facilities, and recreation centres. The durable construction, high quality and low maintenance of this product make it a popular choice.

Features

• All Canadian stainless steel construction
• Bag bracket holder apparatus for easy and secure support of plastic bags
• Waste opening 24.1cm (9½″) in diameter
• Shipped in a durable corrugated container and covered in protective plastic
• Recommended bag size: 76.2cm x 96.5cm (30″ x 38″)

Capacity

• The waste receptacle has a total capacity of 62 litres (16 US Gal., 13.5 Imp Gal.)

Materials

• Top: spun 18 gauge type 304 stainless steel
• Body: roll formed 22 gauge stainless steel
• Bottom: spun 22 gauge stainless steel

Product Dimensions

• 47.2cm W 81.8cm H 23.5cm D (18.6″ W x 32.2″ H x 9.25″ D)

Product Weight

• 9.3 kg (20.5 lbs)

Installation Guidelines

For unrestricted access, bottom of the unit to floor must be between 38.1cm to 121.9cm (15″ to 48″). Mark mounting holes against the mounting surface using a pencil and level. Use a screwdriver or power drill to drill screws in the desired mounting surface and attach the product. Please note that it is recommended that all installations be conducted by a qualified tradesperson. Please read and follow any additional installation guidelines provided with the products.

Maintenance

Normal preventative maintenance and cleaning will keep Frost products functioning properly and may extend normal product life. Products should be wiped down with a damp soft cloth periodically. Approved stainless steel cleaner may be used to clean scuffs or fingerprints on stainless surfaces. Do not use harsh detergents or chemical cleaners. For stainless steel please do not spray with any product containing bleach, acids, or chlorides, which can be found in many cleaning products such as toilet bowl cleaners. Use of these cleaning solutions may cause discolouration and if used for prolonged periods of time they can eat away at points in the stainless steel. If discolouration occurs, the use of an approved stainless steel cleaner and a firmer scrub pad, such as a Scotch Brite Pad #7447, may remove the markings. Wipe away any debris from the area and gently rub with the pad. Then spray the area with a stainless steel cleaner/polish and rinse and dry. Always wipe with the grain direction for stainless steel products. If a cleaning agent has begun to eat away at the steel on a unit then the unit will likely need to be replaced. The stainless steel that Frost Products uses is of high quality and stainless steel is resistant to rust. However, discolouration that appears to be rust can be caused by cleaning solutions and soaps mentioned above. It is important to discontinue use of any cleaning agent or soap if discolouration begins to occur. Clean off the discolouration as quickly as possible to avoid any permanent damage to the unit. Maintenance staff should be taught how to recognize the signs that they are not using the appropriate cleaning products and how to correctly maintain stainless steel items.

Warranty

If any product or part proves to be defective within 12 months from date of shipment from the factory it will be repaired or replaced without any charge including freight costs when authorized. Costs resulting from the installation or removal of defective products are not covered under this warranty. Discolouration to stainless steel parts resulting from exposure to harsh environmental and / or chemicals are not considered to be defects in workmanship or material and are not covered under warranty.

9HR-SS