Toilet Backrest

Site Location

Frost’s 1028 toilet backrest are made of heavy duty stainless steel and plastic laminate. Typically, these units are used in schools/universities, nursing homes, restaurants, malls, office buildings, hospitals, recreation centres, and residential properties. The durable construction and high quality stainless steel make this unit a popular choice. 

Features

• For use with tankless toilets
• Provides comfortable back support
• Brushed stainless steel tube
• White solid plastic laminate back
• Easy to install
• Concealed mounting

Materials

• 1-1/4” (32mm) Stainless steel tube with a 0.064” wall (1.6mm). Utilizes concealed fastening mounting. Backrest is 0.5” (12.7mm) solid plastic laminate (white finish).

Product Dimensions

• 38.3cm L x 20.3cm D x 10.2cm H (15.1”L x 8”D x 4”H)

Product Weight

• 4 lbs (1.8 kg)

Installation Guidelines

 We recommend installation by qualified trades persons. Installers must consult and comply with local building codes. Mounting hardware and other systems to be determined by contractor and installer pending specific structure, design, and conditions. All installations must be fully inspected and approved by property owners and maintenance personnel prior to bar being put into use. Failure to comply to proper installation procedure will void warranty and may result in malfunctioning or injury.

Maintenance

Normal preventative maintenance and cleaning will keep Frost products functioning properly and may extend normal product life. Products should be wiped down with a damp soft cloth periodically. Approved stainless steel cleaner may be used to clean scuffs or fingerprints on stainless surfaces. Do not use harsh detergents or chemical cleaners. For stainless steel please do not spray with any product containing bleach, acids, or chlorides, which can be found in many cleaning products such as toilet bowl cleaners. Use of these cleaning solutions may cause discolouration and if used for prolonged periods of time they can eat away at points in the stainless steel. If discolouration occurs, the use of an approved stainless steel cleaner and a firmer scrub pad, such as a Scotch Brite Pad #7447, may remove the markings. Wipe away any debris from the area and gently rub with the pad. Then spray the area with a stainless steel cleaner/polish and rinse and dry. Always wipe with the grain direction for stainless steel products. If a cleaning agent has begun to eat away at the steel on a unit then the unit will likely need to be replaced. The stainless steel that Frost Products uses is of high quality and stainless steel is resistant to rust. However, discolouration that appears to be rust can be caused by cleaning solutions and soaps mentioned above. It is important to discontinue use of any cleaning agent or soap if discolouration begins to occur. Clean off the discolouration as quickly as possible to avoid any permanent damage to the unit. Maintenance staff should be taught how to recognize the signs that they are not using the appropriate cleaning products and how to correctly maintain stainless steel items.

Warranty

If any product or part proves to be defective within 12 months from date of shipment from the factory it will be repaired or replaced without any charge including freight costs when authorized. Costs resulting from the installation or removal of defective products are not covered under this warranty. Discolouration to stainless steel parts resulting from exposure to harsh environmental and / or chemicals are not considered to be defects in workmanship or material and are not covered under warranty. 

B-5892