Stainless Steel Shower Rod

Site Location

Frost’s 1145-S shower rods are often specified and designed for use in both commercial and residential settings. Typically, these are used in schools/universities, recreation centres, hotels, hospitals, fitness facilities, and long-term care homes. These shower rods are stocked in three sizes 60” (1145-S), 36” (1145-36S), and 72” (1145-72S).

Features

• Easy to install and maintain
• Shower rod and flanges are stainless steel
• Stocked in three lengths (60”, 36”, and 72”)
• Custom sizes may be available upon special request

Materials

• Shower Rod: 18 gauge type 304 stainless steel, brushed finish
• Flanges: drawn 16 gauge type 304 stainless steel, brushed finish

Product Dimensions

• 1145-S: 152.4cm L x 8.3cm W x 3.2cm H (60” L x 3.25” W x 1.25” H)
• 1145-36S: 91.4cm L x 8.3cm W x 3.2cm H (36” L x 3.25” W x 1.25” H)
• 1145-72S: 182.9cm L x 8.3cm W x 3.2cm H (72” L x 3.25” W x 1.25” H)

Product Weight

• 1145-S: 2.7kg (6.0 lbs)
• 1145-36S: 1.4kg (3.0 lbs)
• 1145-72S: 2.9kg (6.5 lbs)

Installation Guidelines

Hold shower rod up to desired location with flanges on the end. Make sure the shower rod is level and mark the wall with a pencil in the screw hole locations. Use screws provided and anchors if necessary (not provided). Drill flanges into place to secure the shower rod.

Maintenance

Normal preventative maintenance and cleaning will keep Frost products functioning properly and may extend normal product life. Products should be wiped down with a damp soft cloth periodically. Approved stainless steel cleaner may be used to clean scuffs or fingerprints on stainless surfaces. Do not use harsh detergents or chemical cleaners. For stainless steel please do not spray with any product containing bleach, acids, or chlorides, which can be found in many cleaning products such as toilet bowl cleaners. Use of these cleaning solutions may cause discolouration and if used for prolonged periods of time they can eat away at points in the stainless steel. If discolouration occurs, the use of an approved stainless steel cleaner and a firmer scrub pad, such as a Scotch Brite Pad #7447, may remove the markings. Wipe away any debris from the area and gently rub with the pad. Then spray the area with a stainless steel cleaner/polish and rinse and dry. Always wipe with the grain direction for stainless steel products. If a cleaning agent has begun to eat away at the steel on a unit then the unit will likely need to be replaced. The stainless steel that Frost Products uses is of high quality and stainless steel is resistant to rust. However, discolouration that appears to be rust can be caused by cleaning solutions. It is important to discontinue use of any cleaning agent or soap if discolouration begins to occur. Clean off the discolouration as quickly as possible to avoid any permanent damage to the unit. Maintenance staff should be taught how to recognize the signs that they are not using the appropriate cleaning products and how to correctly maintain stainless steel items.

Warranty

If any product or part proves to be defective within 12 months from date of shipment from the factory it will be repaired or replaced without any charge including freight costs when authorized. Costs resulting from the installation or removal of defective products are not covered under this warranty. Discolouration to stainless steel parts resulting from exposure to harsh environmental and / or chemicals are not considered to be defects in workmanship or material and are not covered under warranty.

207 B207 B-207 207X36 B207X36 B-207X36 207X72 B207X72 B-207X72 207X60 B207X60 B-207X60 1204 1204-2 1214 1214-2 1204-2-060 1204-02-036 1204-02-072 1224-036 1224-060 1224-072 1224 1214-2-036 1214-2-060 1214-2-072 6047 B-6047 B6047 6107 B6107 B-6107 6047X36 6047X60 6047X72 B-6047X36 B-6047X60 B-6047X72