Heavy Duty Shelf, 5.5″ Depth, 24″ Length

Site Location

Frost’s 950-24 heavy duty shelf is extremely durable and practical. Typically, these units are used in schools/universities, restaurants, malls, office buildings, condominiums, fitness facilities, and recreation centres. The durable construction and high quality stainless steel make this unit a popular choice.

Features

• Made in Canada with high quality stainless steel
• New rounded corner shelf with safety edges on all protruding sides
• Easy to install and maintain
• Custom sizes also available up to 54″ (137 cm)

Materials

• 22 gauge stainless steel no. 4 brushed finish welded to stainless steel wall plate

Product Dimensions

• 61.0cm W x 10.2cm H x 15.2cm D (24″ W x 4″ H x 5.5″ D)

Product Weight

• 1.1kg (2.5 lbs)

Installation Guidelines

Supplied with mounting screws. All mounting screw holes below shelf. Mark mounting holes against the mounting surface using a pencil and level. Use a screwdriver or power drill to drill screws in the desired mounting surface and attach the unit. Please note that it is recommended that all installations be conducted by a qualified tradesperson. Please read and follow any additional installation guidelines provided with the products.

Maintenance

Normal preventative maintenance and cleaning will keep Frost products functioning properly and may extend normal product life. Products should be wiped down with a damp soft cloth periodically. Approved stainless steel cleaner may be used to clean scuffs or fingerprints on stainless surfaces. Do not use harsh detergents or chemical cleaners. For stainless steel please do not spray with any product containing bleach, acids, or chlorides, which can be found in many cleaning products such as toilet bowl cleaners. Use of these cleaning solutions may cause discolouration and if used for prolonged periods of time they can eat away at points in the stainless steel. If discolouration occurs, the use of an approved stainless steel cleaner and a firmer scrub pad, such as a Scotch Brite Pad #7447, may remove the markings. Wipe away any debris from the area and gently rub with the pad. Then spray the area with a stainless steel cleaner/polish and rinse and dry. Always wipe with the grain direction for stainless steel products. If a cleaning agent has begun to eat away at the steel on a unit then the unit will likely need to be replaced. The stainless steel that Frost Products uses is of high quality and stainless steel is resistant to rust. However, discolouration that appears to be rust can be caused by cleaning solutions and soaps mentioned above. It is important to discontinue use of any cleaning agent or soap if discolouration begins to occur. Clean off the discolouration as quickly as possible to avoid any permanent damage to the unit. Maintenance staff should be taught how to recognize the signs that they are not using the appropriate cleaning products and how to correctly maintain stainless steel items.

Warranty

If any product or part proves to be defective within 12 months from date of shipment from the factory it will be repaired or replaced without any charge including freight costs when authorized. Costs resulting from the installation or removal of defective products are not covered under this warranty. Discolouration to stainless steel parts resulting from exposure to harsh environmental and / or chemicals are not considered to be defects in workmanship or material and are not covered under warranty.

U792 U770 0690 ASI0690 0692 ASI0692 0694 ASI0694 7380 ASI7380 295 B-295 295 UX135-BF-18 UX135-SF-18 US49 UX135-BF-24 UX135-SF-24 B-683 B693 683 B-683X24 B683X24 683X24 B-296 B-298 296 298 B298 B296 9094 9095