Recessed Mounted Liquid Soap Dispenser

Site Location

Frost’s 719 recessed mounted manual liquid soap dispenser offers a professional solution for high volume areas requiring recessed mounting. Typically, the dispenser is used in schools/universities, airports, restaurants, malls, office buildings, fitness facilities, and recreation centres. This product offers a simple, space-saving, option for customers requiring professional commercial soap dispensers.

Features

• Recessed mounted to save space
• Leak proof viewing window allows staff to see soap levels
• Dispensing volume is approximately 1cc
• Bulk filled
• For use with liquid soap
• Provides clean and professional appearance
• Tough leak proof polycarbonate soap tank
• Lockable to prevent vandalism and theft

Dispensing

Frost’s 719 dispenses liquid soap at 10-20% solution, as well as more viscous synthetic detergents, lotions, and antiseptic soaps. The dispenser is non-proprietary and is bulk filled allowing end users flexibility in their commodity sourcing. Avoid filling with thick liquids or using abrasive cleaners. Do not overfill.

Capacity

• The bulk filled reservoir holds 1 litre (33.8 US oz.) of liquid soap

Materials

• Door: 22 gauge stainless steel, brushed finish
• Recessed Body: Galvanized steel
• Soap Tank: Polycarbonate

Product Dimensions

• 23.8cm W x 14.0cm H x 11.2cm D (9.4” W x 5.5” H x 4.4” D)

Product Weight

• 1.8 kg (4 lbs)

Installation Guidelines

Provide a rough opening of: Provide a rough opening of: 22.8cm (9”) W x 12.0cm (4.75″) H x 10.2cm (4″) D. Please note that it is recommended that all installations be conducted by a qualified tradesperson. Failure to do so may result in serious injury. Please read and follow any additional installation guidelines provided with the products.

Maintenance

Normal preventative maintenance and cleaning will keep Frost products functioning properly and may extend normal product life. We recommend that units be periodically rinsed out with warm water to prevent soap build up that may hinder the performance of the valve. Products should be wiped down with a damp soft cloth periodically. Approved stainless steel cleaner may be used to clean scuffs or fingerprints on stainless surfaces. Do not use harsh detergents or chemical cleaners. For stainless steel please do not spray with any product containing bleach, acids, or chlorides, which can be found in many cleaning products such as toilet bowl cleaners. Use of these cleaning solutions may cause discolouration and if used for prolonged periods of time they can eat away at points in the stainless steel. If discolouration occurs, the use of an approved stainless steel cleaner and a firmer scrub pad, such as a Scotch Brite Pad #7447, may remove the markings. Wipe away any debris from the area and gently rub with the pad. Then spray the area with a stainless steel cleaner/polish and rinse and dry. Always wipe with the grain direction for stainless steel products. If a cleaning agent has begun to eat away at the steel on a unit then the unit will likely need to be replaced. The stainless steel that Frost Products uses is of high quality and stainless steel is resistant to rust. However, discolouration that appears to be rust can be caused by cleaning solutions and soaps mentioned above. It is important to discontinue use of any cleaning agent or soap if discolouration begins to occur. Clean off the discolouration as quickly as possible to avoid any permanent damage to the unit. Maintenance staff should be taught how to recognize the signs that they are not using the appropriate cleaning products and how to correctly maintain stainless steel items.

Warranty

If any product or part proves to be defective within 12 months from date of shipment from the factory it will be repaired or replaced without any charge including freight costs when authorized. Costs resulting from the installation or removal of defective products are not covered under this warranty. Discolouration to stainless steel parts resulting from exposure to harsh environmental and / or chemicals are not considered to be defects in workmanship or material and are not covered under warranty.

U1304 643 646 U1314 0326 ASI0326 6326 ASI6326 9326 ASI9236 B306 B-306 B4063 B-4063