Surface Mounted Double Napkin/Tampon Vendor

Site Location

Frost’s 608-3 double napkin/tampon vendor is sleek and practical. This surface mounted vending machine line provides easy flexible mounting on any type of wall material or construction. Typically, these products are used in schools, office buildings, recreational facilities, and other commercial properties. The user friendly functionality and professional appearance of this unit make it a popular choice in areas that require heavy duty, durable dispensers.

Features

• Canadian made with 20 and 22 gauge stainless steel
• Door hinged with full length stainless steel piano hinges and secured with two tumbler keyed locks, keys provided
• All units have removable coin box with tumbler lock keyed different from door
• Interchangeable coinage mechanism for free, $0.25, $0.50 or $1.00 (coin) vending (parts available for purchase)

Dispensing

Frost code 608-3 is designed to dispense standard napkins and tampons. To operate this unit, manually put in the required coins (if any) and turn the mechanism. To refill this unit, use the provided keys to open the body and manually insert the desired products in the empty slots. Use the weights provides to secure the product in the slots.

Capacity

• 15 no. 4 napkin (11 no. 6), 22 standard tampon tubes

Materials

• All welded stainless steel construction of 20 and 22 gauge steel type 430
• Brushed finish

Product Dimensions

• 37.8cm W x 64.5cm H 14.6cm D (14.9″ W x 25.4″ H x 5.75″ D)
• Dimensions of the inner product chutes are as follows; Tampon slot: 5.5"W x 14.5"H x 0.9"D, Napkin Slot: 4.75"W x 15"H x 3.25"D

Product Weight

• 9.5kg (21 lbs)

Installation Guidelines

Using the appropriate tools for installation, drill mounting holes as required and attached the unit into desired surface. For barrier free mounting ensure that the coin mechanism handle does not exceed 48″ (121.9 cm) above floor level. Please note that it is recommended that all installations be conducted by a qualified tradesperson. Please read and follow installation guidelines provided with the products. Failure to do so may result in serious injury or death.

Maintenance

Normal preventative maintenance and cleaning will keep Frost products functioning properly and may extend normal product life. Products should be wiped down with a damp soft cloth periodically. Approved stainless steel cleaner may be used to clean scuffs or fingerprints on stainless surfaces. Do not use harsh detergents or chemical cleaners. For general dirt and blemishes on painted steel or plastic use warm water and mild soap, or a general mild cleaning solution. When using any type of cleaning solution, spray onto a discrete area to test before full usage. After the cleaning agent is applied, wipe off with a clean soft cloth or sponge. For stainless steel please do not spray with any product containing bleach, acids, or chlorides, which can be found in many cleaning products such as toilet bowl cleaners. Use of these cleaning solutions may cause discolouration and if used for prolonged periods of time they can eat away at points in the stainless steel. If discolouration occurs, the use of an approved stainless steel cleaner and a firmer scrub pad, such as a Scotch Brite Pad #7447, may remove the markings. Wipe away any debris from the area and gently rub with the pad. Then spray the area with a stainless steel cleaner/polish and rinse and dry. Always wipe with the grain direction for stainless steel products. If a cleaning agent has begun to eat away at the steel on a unit then the unit will likely need to be replaced. The stainless steel that Frost Products uses is of high quality and stainless steel is resistant to rust. However, discolouration that appears to be rust can be caused by cleaning solutions and soaps mentioned above. It is important to discontinue use of any cleaning agent or soap if discolouration begins to occur. Clean off the discolouration as quickly as possible to avoid any permanent damage to the unit. Maintenance staff should be taught how to recognize the signs that they are not using the appropriate cleaning products and how to correctly maintain stainless steel items.

How to Change Mechanism Types

For an instructional video on how to change mechanism types and rotor types please CLICK HERE

Frost’s 608-1, 608-3, and 615-5 feminine product vendors can be changed between various types of operation. These units can be made to dispense product at a cost of $0.25, $0.50, $1.00 (Canadian coins only), or Free.

If you are trying to change the amount charged for these items, the lists below will tell you what parts are required to be purchased.

Changing from $0.25 or $1.00 operation to Free dispensing:

• You will require 2 Free Mechanisms: Free Mechanism – Frost (frostproductsltd.com)
• If desired, you can purchase 1 Free Napkin label: Free Decal for Napkin Vendor – Frost (frostproductsltd.com)
• If desired, you can purchase 1 Free Tampon label: Free Decal for Tampon Vendor – Frost (frostproductsltd.com)

Changing from $0.50 to Free dispensing:

• You will require 2 Free Mechanisms: Free Mechanism – Frost (frostproductsltd.com)
• You will require 1 Napkin Rotor: Napkin Rotor for .25 cent, Free and 1 dollar – Frost (frostproductsltd.com)
• You will require 1 Tampon Rotor: Tampon Rotor for .25 cent, Free and 1 dollar – Frost (frostproductsltd.com)
• If desired, you can purchase 1 Free Napkin label: Free Decal for Napkin Vendor – Frost (frostproductsltd.com)
• If desired, you can purchase 1 Free Tampon label: Free Decal for Tampon Vendor – Frost (frostproductsltd.com)

Changing from $0.25 to $0.50 dispensing:

• You will require 1 $0.50 Napkin Rotor: Napkin Rotor for 50 cent – Frost (frostproductsltd.com)
• You will require 1 $0.50 Tampon Rotor: Tampon Rotor for 50 cent – Frost (frostproductsltd.com)
• If desired, you can purchase 1 $0.50 Napkin label: Fifty Cent Decal for Napkin Vendor – Frost (frostproductsltd.com)
• If desired, you can purchase 1 $0.50 Tampon label: Fifty Cent Decal for Tampon Vendor – Frost (frostproductsltd.com)

Changing from $0.50 to $0.25 dispensing:

• You will require 1 $0.25 Napkin Rotor: Napkin Rotor for .25 cent, Free and 1 dollar – Frost (frostproductsltd.com)
• You will require 1 $0.25 Tampon Rotor: Tampon Rotor for .25 cent, Free and 1 dollar – Frost (frostproductsltd.com)
• If desired, you can purchase 1 $0.25 Napkin label: Twenty Five Cent Decal for Napkin Vendor – Frost (frostproductsltd.com)
• If desired, you can purchase 1 $0.25 Tampon label: Twenty Five Cent Decal for Tampon Vendor – Frost (frostproductsltd.com)

Changing from Free to $0.25 dispensing:

• You will require 2 $0.25 Coin Mechanisms: $0.25 Mechanism – Frost (frostproductsltd.com)
• You will require 1 Coin Box: Coin box lock and key – Frost (frostproductsltd.com)
• If desired, you can purchase 1 $0.25 Napkin label: Twenty Five Cent Decal for Napkin Vendor – Frost (frostproductsltd.com)
• If desired, you can purchase 1 $0.25 Tampon label: Twenty Five Cent Decal for Tampon Vendor – Frost (frostproductsltd.com)

Changing from Free to $0.50 dispensing:

• You will require 2 $0.50 Coin Mechanisms: $0.50 Mechanism – Frost (frostproductsltd.com)
• You will require 1 Coin Box: Coin box lock and key – Frost (frostproductsltd.com)
• You will require 1 $0.50 Napkin Rotor: Napkin Rotor for 50 cent – Frost (frostproductsltd.com)
• You will require 1 $0.50 Tampon Rotor: Tampon Rotor for 50 cent – Frost (frostproductsltd.com)
• If desired, you can purchase 1 $0.50 Napkin label: Fifty Cent Decal for Napkin Vendor – Frost (frostproductsltd.com)
• If desired, you can purchase 1 $0.50 Tampon label: Fifty Cent Decal for Tampon Vendor – Frost (frostproductsltd.com)

Changing from Free to $1.00 dispensing:

• You will require 2 $1.00 Coin Mechanisms: $1.00 Mechanism – Frost (frostproductsltd.com)
• You will require 1 Coin Box: Coin box lock and key – Frost (frostproductsltd.com)
• If desired, you can purchase 1 $1.00 Napkin label: $1 Decal for Napkin Vendor – Frost (frostproductsltd.com)
• If desired, you can purchase 1 $1.00 Tampon label: $1 Decal for Tampon Vendor – Frost (frostproductsltd.com)

Warranty

If any product or part proves to be defective within 12 months from date of shipment from the factory it will be repaired or replaced without any charge including freight costs when authorized. Costs resulting from the installation or removal of defective products are not covered under this warranty. Discolouration to stainless steel parts resulting from exposure to harsh environmental and / or chemicals are not considered to be defects in workmanship or material and are not covered under warranty.

U526SM HOSPECO D1 D1-FSS D1-25SS ASI0864 0864 204684-9 ASI204684-9 2706 B2706 B-2706 370639 B-370639 B370639 47069 B-47069 B47069 6083FREE 608-3-FREE 6083025 608-3-025 608-3-0.25 608-3-050 608-3-0.50 608-3-100 608-3-1.00 608-3-$0.25 608-3-$0.50 608-3-$1